|
|
- Inner core must be 3 inches.
- Label rolls must not exceed 12 inches in overall diameter or excessive waste might occur.
- Minimum label width is 2 inches.
- Minimum label height is 3/4 inches. Maximum label height is 6 inches.
- Web width must be between 2" to 6-1/2".
- A minimum of 1/16 inches spacing between labels.
- Minimum 1/16 inches gap from the edge left and right.
- No perforation on the liner.
- Label image direction must be bottom out (see image below).
- The thickness of the label must be at least 50 lb. face stock with a 40 lb. liner.
- All of the labels must be aligned.
- Clear labels are not recommend. Or send us testing samples before sending all your labels.
- When packaging labels, please make sure the inner core is not damaged and the labels are
rewound tightly.
- Only ONE label design per roll. Front and back labels cannot be on the same roll.
- Try to use a resealable/reusable tape to secure the labels on the roll.
 |
Before sending all labels, we suggest that you send one testing roll for us to
test on our labeling machine. To make sure we label your bags correctly,
please provide us with a sample or a diagram of the exact label location.
Label location must be at least 3/4” from bottom. When applicable, please
inform us of your preferred valve location. All label application jobs are final
and cannot be returned or exchanged.
|
|
|
|
